71" Solid Surface Stone Resin Oval-shaped Freestanding Soaking Bathtub with Overflow

Description

This large 71" solid surface tub has plenty of room for 1-2 people to soak. The classic elliptical rounded design and ergonomically designed 128° backrest make for a comfortable soak. The matte white finish will match any bathroom for a modern look.

Features

• Solid Surface Material: Constructed of solid surface for years of durability and strength.Hard, tough and wear-resistant, no water seepage, no dirt seepage, no bacteria attached to the surface, easy to clean, slow heat dissipation, no obvious cold feeling, long time light does not change color, strong acid resistance and corrosion resistance.
• Ergonomic Design: The left and right backrests of this large size bathtub are 128°, which is ergonomically designed for a more comfortable soak.
• Overflow Pipe: Overflow pipe is thin on the bottom of the thicker drainage more smooth, pipe diameter widened, increase the drainage capacity.
• Smooth Touch: Hand polished 800 #, smooth and delicate touch, smooth and rounded without burrs, to prevent cutting skin.
• Spacious Space: Spacious design can accommodate a bathers, soak the tub, enjoy the depth, full-body experience, tilt the lumbar support to provide additional comfort.
• Package Includes: Bathtub X1, Pop-up Drain X1, 600 Grit Sandpaper X1, Scouring Pad X1
• Certifications：cUPC, UL, HTT, SGS, ISO, INTERTEK

Specification

Care and Maintenance

In most cases, solide surface products can be repaired if the surface accidentally damaged.  Howerer, be sure to following the guidelines to prevent any permanent damage.

• Avoid exposing products to strong chemicals, such as paint removers, oven cleaners etc. If contact occurs, quickly flush the surface with water.
• Do not cut directly on the countertos. 
• Boiling water alone will not damage your basin, however it's a good practice to run your faucet while pouring boiling water into your sink. 

Removing minor cuts and scratches

• Judge the severity of the scratch and start with the finest sandpaper to remove the scratch. Rub over scratch in a straight line to remove it. Periodically switch rubbing directions 90 degrees. Be sure all of the scratch is removed. If this first step takes too long, try the next heaviersandpaper. To minimize dustduring sanding, wet the surface. Rinse pad periodically to clean residue.